Welcome to visit Hoyogo website, let's connect the world together!
Customer service hotline:+86 13723413985 or 400 058 2288
It is expected that the PCB industry will grow at a strong rate in the next five years, and many industries will also receive higher demand for PCBs from circuit board manufactur...
2020/05/08
During this CNY, a sudden outbreak of disease has disrupted everyone’s plan. First of all, Wuhan, Hubei has become the hardest hit area, which has moved people’s hearts and every...
2020/05/05
The rapid development of mobile phones, electronics, communications and other industries has also driven the rapid growth of the PCB circuit board industry. Due to the incre...
2020/04/30
PCB circuit boards are commonly used in household appliances, televisions, radios, mobile phones, computers, digital and other electronic products. I believe that everyone is fam...
2020/04/27
First. One of the main advantages of deposited copper is its lower ground impedance. A large part of the so-called anti-interference is caused by the reduction in ground imp...
2020/04/23
1. Circuit Layer Generally, electrolytic copper foil is etched to form a printed circuit for assembly and connection of devices. Compared with the traditional F...
2020/04/20
The PCB is made of different components and various complicated process technologies. The PCB structure has a single-layer, double-layer and multi-layer structure. Different laye...
2020/04/09
The circuit board made of by a layer of copper foil circuits stacked on top of each other. The connection between different circuit layers depends on the PCB drill hole. Because ...
2020/04/03
1. Signal lines that need impedance should be set strictly according to the line width and line spacing calculated by the stack. Such as RF signal (conventional 50R con...
2020/03/25
We found that the circuits on the board were all bent. Why should it be designed like this? Do you know the answer? First, if the circuit in the man...
2020/03/19
English
Français
Deutsch
Português
Pусский
中文