Welcome to visit Hoyogo website, let's connect the world together!
Customer service hotline:+86 13723413985 or 400 058 2288
Both the dry film and the wet film of the PCB refer to the raw materials used for the Circuit. The dry film is a kind of high-molecular compound. It generates a po...
2019/08/28
A high performance organic rigid PCB substrate, usually composed of dielectric layer(epoxy resin, fiberglass) and high purify conductor(copper foil). The relevant ...
2019/08/22
The rigid PCB has alternating layers of different materials laminated together by heat and adhesive to form a single object. So what materials is it mainly compose...
2019/08/13
PCB proofing is a small production before the mass production of the board. It is generally used to test the reliability and efficiency of circuit design and is a ...
2019/08/07
What is PCB proofing? It has become a question for many people. In fact, it is not difficult to understand that PCB proofing refers to the trial production of the ...
2019/07/30
PCB open circuit and short circuit problems are encountered almost every day by the manufacturers of PCBs, and such problems have been plaguing production and qual...
2019/07/22
The FPC industry will continue to expand demand with the improvement of people's living standards and personalized design. Only mid-to-high end products will use F...
2019/07/11
The ENEPIG (Electroless Nickel Electroless Palladium Immersion Gold) technology, is the addition of a layer of palladium between nickel and gold. In the deposition...
2019/07/03
At present, there are three main types of PCB potting adhesive, namely polyurethane potting adhesive, epoxy resin potting adhesive, and silicone potting adhesive. ...
2019/06/27
The PCB solder mask is a heat resistant coating material that can be applied to selected areas to prevent solder from depositing during subsequent soldering. The s...
2019/06/18
English
Français
Deutsch
Português
Pусский
中文