News

The PCBA processing process is a very precise process, and it is more complicated and cumbersome, so there will be relatively high defects in the PCBA processing process. In orde...

In the PCBA processing process, welding is a very important process. If there is a slight negligence in the operation and the relevant process regulations are not implemente...

With the development of science and technology, the volume of PCBA is getting smaller and more precise, and some defects in processing cannot be distinguished with the naked eye,...

Wave soldering is one of the important links in PCBA processing. It has certain requirements for PCBA, which are mainly reflected in PCB design, component placement, PCB and flux...

PCB pad falling off is a relatively common bad phenomenon in the PCBA processing process, that is, the phenomenon that the pads are separated from the PCB. As...

The application of PCB in today's electronic products can be seen everywhere, and there are different shaped pads on the PCB. As the basic unit of PCB mounting, what is the role ...

LED is short for Light Emitting Diode. At present, SMD packaging is the most widely used packaging form in LED applications. Generally, the light emitted by a single LED assembly...

Why should FPC be stiffened? Because the FPC itself is only flexible, and the application scenarios of individual FPC are different, in order to meet the use requirements, it is ...

OSP and immersion gold are two common technologies in PCB surface treatment, the purpose of which is to prevent copper surface oxidation and help soldering. So what's the di...

The PCB break away tab is not part of the PCB, and its existence will consume more boards, thereby increasing the cost of the board, so we need to remove it after the PCBA proces...