News

After the PCB is printed, various electronic components need to be welded to fixed positions as required to form a PCBA with certain functions, and the welding positions of ...

In loving September, we welcomed autumn with joy; in golden autumn October, we celebrated the harvest with full of blessings. In November, HoYoGo welcomed our birthday party. We ...

Conformal coating is a specially formulated coating used to protect circuit boards and related equipment from environmental erosion. In addition to anti-mildew, anti-salt spray a...

In PCBA processing, it is more common to apply solder paste for soldering by wave soldering or reflow soldering, but sometimes a dispensing technology is also required. So what i...

During PCB assembly, bubbles sometimes appear during PCB soldering, which usually occurs during reflow soldering and wave soldering. Excessive bubbles wi...

The PCBA processing process is a very precise process, and it is more complicated and cumbersome, so there will be relatively high defects in the PCBA processing process. In orde...

In the PCBA processing process, welding is a very important process. If there is a slight negligence in the operation and the relevant process regulations are not implemente...

With the development of science and technology, the volume of PCBA is getting smaller and more precise, and some defects in processing cannot be distinguished with the naked eye,...

Wave soldering is one of the important links in PCBA processing. It has certain requirements for PCBA, which are mainly reflected in PCB design, component placement, PCB and flux...

PCB pad falling off is a relatively common bad phenomenon in the PCBA processing process, that is, the phenomenon that the pads are separated from the PCB. As...